Total Pageviews

My Blinkie

Contact Me

Powered by Blogger.

Labels

Blog Archive

Tuesday, December 27, 2011

Any resemblance to any other tutorial or signature is merely coincidental and is not intended.

I am using the artwork of Pete Tapang 

I am using Scrazy Scraps PTU kit “LA Diva”  You can purchase that here

I am using the font: Duchess
I am using plugins:,
I am using Mask #88 from Vaybs, you can get it here


Pieces of the kit used in this tutorial are
Paper 2
Glitter Paper 3


Element 28
Element 11
Element 8
Element 7
Element 12
You must have working knowledge of PSP to complete this tutorial.  This tutorial was written using PSPXII

Open new Canvas 600*600

Open Paper 2 and resize to 600*600.  Paste apply mask and resize to your liking, Merge Group,
Open Element 28 c/p to canvas, resize to your liking. 
Open Glitter paper 3, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections, Modify, Expand, 3 pixels.  Select okay, invert selection and delete leaving the inside of the frame with your paper.

Take your tube and paste it on top of the frame.  Use the wand to select the outside of Element28, and erase the bits of the tube so it looks like she’s over the frame.  Apply Lokas 3D effect


Element 11, resize and place to your liking
Element 8, resize and place to your liking
Element 7 resize and place to your liking
Element 12, resize and place to your liking


Apply drop shadow to your taste.  Mine are all 2*2’s
Resize the signature if needed
The name.  Using Duchess Size 24
Drop Shadow to your liking
Add your copyright information and license number before save



Any resemblance to any other tutorial or signature is merely coincidental and is not intended.

I am using the artwork of Tony Tzanoukakis  You can purchase his artwork and a license to use them HERE you MUST have a license to her her work

I am using Wicked Princess Scraps FTU kit “Golden Nights”  You can get  that here

I am using the font: Ali Baba
I am using plugins:, Lokas 3-D Shadow, Eye Candy 4.0, Xenofex Constellation
I am using New Years 2012 Mask 1 from Cookies Kreative Corner you can get that here


Pieces of the kit used in this tutorial are
PP4
PP8

Rectangle Frame
Heart Scatter
Clock
Hanging Heart Dangly
Sequined Bowtie
Flower Swag
Fancy Mask
Bottle
Glass

You must have working knowledge of PSP to complete this tutorial.  This tutorial was written using PSPXII

Open new Canvas 600*600

Open PP4 and resize to 600*600.  Paste apply mask and resize to your liking, Merge Group,
Open Rectangle Frame c/p to canvas, resize to your liking. 
Open PP8, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections, Modify, Expand, 3 pixels.  Select okay, invert selection and delete leaving the inside of the frame with your paper.

Use the close up of your tube, pasted under the frame, use wand to select the outside of PP8, invert and delete the bits of the tube you don’t’ want.  Apply Luminance legacy.  Drop shadow.

Use the full tube, paste and place to your liking, apply Lokas 3-D shadow

Heart Scatter, resize, and place to your liking
Clock, resize to your liking and place
Hanging Heart Dangly resize and place to your liking
Sequined Bowtie resize and place to your liking, over the top of the dangly
Flower Swag, resize and place to your liking
Fancy Mask, resize and place to your liking
Bottle, resize and place to your liking
Glass resize, and place to your liking


Apply drop shadow to your taste.  Mine are all 2*2’s
Resize the signature if needed
The name.  Using Ali Baba size 26, Apply Eye Candy 4.0, Chrome, Bronze.  Xenofex, Constellation 


Drop Shadow to your liking
Add your copyright information and license number before save


Tuesday, November 29, 2011


Any resemblance to any other tutorial or signature is merely coincidental and is not intended.

I am using the artwork of FallnAngel–.  You can purchase her artwork and a license to use them HERE you MUST have a license to use her work

I am using the font: Witched
I am using plugins:  Alien Eye Candy 3.1 - Glow
I am using Rissa’s Designs PTU kit Emerald, which you can download here
I am using Mask #82 from Designs by Vaybs, you can get that here


Pieces of the kit used in this tutorial are
Paper 4
Paper 11
Frame 8
Wands
Sparkles
Ring
Pendant
Bow 2
Dot Swirls 1
You must have working knowledge of PSP to complete this tutorial.  This tutorial was written using PSPXII

Open new Canvas 600*600

Open paper 4 and resize to 600*600.  Paste apply mask and resize to your liking, Merge Group
Open Element 20 c/p to canvas, resize to your liking
Open frame 8, paste, resize to your liking
Open Paper 11, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections,Modify, Expand, 5 pixels.  Select okay, invert selection and delete leaving the inside of the frame with your paper
Take your tube and paste it under the frame, Resize to your liking, select the paper layer with your magic wand, activate your tube layer, delete the bits you don’t want.  Apply Luminace Legacy
Paste your full tube layer on top, resize and place to your liking,
Wands, resize and place under the inner tube layers
Sparkles, Resize and Over the top of the frame
Ring , resize and place to your liking
Pendant, Resize and place to your liking
Bow 2, resize and place over the top of the Pendant clasp
Dot Swirls 1, resize and place under the main tube layer


Apply drop shadow to your taste.  Mine are all 2*2’s
Resize the signature if needed
The name.  Using the Witched size 48  Colors #10270a,Eye Candy 3.1 Glow 5 pixel, fat setting color # #ddd7d9
Drop Shadow to your liking
Add your copyright information and license number before save



Any resemblance to any other tutorial or signature is merely coincidental and is not intended.

I am using the artwork of FallnAngel–.  You can purchase her artwork and a license to use them HERE you MUST have a license to use her work

I am using the font: Santa’s Sleigh Full
I am using plugins:  Alien Eye Candy 3.1
I am using Daniela’s FTU kit Christmas Joy, which you can download here
I am using Mask #Christmas_7 from K’lani Designs, you can get it here


Pieces of the kit used in this tutorial are
Paper 2
Paper 8
Frame 4
Element 27
Element 24
Element 22
Element 18

You must have working knowledge of PSP to complete this tutorial.  This tutorial was written using PSPXII

Open new Canvas 600*600

Open paper 72 and resize to 600*600.  Paste apply mask and resize to your liking, Merge Group
Open Element 20 c/p to canvas, resize to your liking
Open frame4, paste, resize to your liking
Open Paper 8, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections,Modify, Expand, 5 pixels.  Select okay, invert selection and delete leaving the inside of the frame with your paper
Take your tube and paste it under the frame, Resize to your liking, select the paper layer with your magic wand, activate your tube layer, delete the bits you don’t want.  Duplicate, original layer apply Guassian Blur set on 3, drop shadow.  Duplicate layer set on soft light
Paste your full tube layer on top, resize and place to your liking,
Element 27, resize and place under the inner tube layers
Element 24, Resize and place to your liking
Element 22, , resize and place to your liking
Element 18, Resize and place to your liking


Apply drop shadow to your taste.  Mine are all 2*2’s
Resize the signature if needed
The name.  Using the Santa’s Sleigh Full size 24  Colors #500800, Candy 3.1 Glow 5 pixel, fat setting color #FFFFF
Drop Shadow to your liking
Add your copyright information and license number before save
Friday, November 25, 2011



Any resemblance to any other tutorial or signature is merely coincidental and is not intended.

I am using the artwork of Arthur Crowe  You can purchase his artwork and a license to use them HERE you MUST have a license to her her work

I am using Wicked Princess Scraps PTU kit “Deputy Brad”  You can purchase that here

I am using the font: 28 Days Later
I am using plugins: Lokas 3-D
I am using Mask #72 from Vaybs, you can get it here


Pieces of the kit used in this tutorial are
PP8
PP9
Jaildoor
Bullet hole Spray
Bullets
Evidence label 2
Alcohol
Baton 2
Cuffs1
Brush

You must have working knowledge of PSP to complete this tutorial.  This tutorial was written using PSPXII

Open new Canvas 600*600

Open PP8 and resize to 600*600.  Paste apply mask and resize to your liking, Merge Group,
Open Jaildoor c/p to canvas, resize to your liking. 
Open PP9, resize to 600*600. Paste under the jail door, use your selection tool and go around the outside of the bars, invert selection and delete leaving the inside of the door with your paper.

Take the close up of the tube and put it under the jail door.  Use the wand to select the outside of PP9, Invert, Delete, apply Hard Light.  Take the full tube and paste it and move it to the right side of the siggy, apply Lokas 3-D


Bullet Hole Spray, resize to your liking and place on top of Mask
Bullets, Resize and set over the bottom of your tube
Evidence label Two, Resize and rotate to your liking, place under bullets to the Right
Alcohol, resize and place on the left side over the jail door
Baton 2, flip, resize and place over the alcohol bottles
Cuffs 1 Resize and place behind the Alcohol bottles
Brush, Resize and place on top of the other elements

Apply drop shadow to your taste.  Mine are all 2*2’s
Resize the signature if needed
The name.  28 Days Later size 28  Color #000000, apply Eye Candy 3.1 Glow color FFFFF, Fat, Pixels 3
Drop Shadow to your liking
Add your copyright information and license number before save


Thursday, October 27, 2011


Any resemblance to any other tutorial or signature is merely coincidental and is not intended.

I am using the artwork of Anna 4X  You can purchase his artwork and a license to use them HERE you MUST have a license to her her work

I am using Wicked Princess Scraps PTU kit “Chef Otelia”  You can purchase that here

I am using the font: Comic San Serf, Civitype
I am using plugins:, Lokas 3D,
I am using Mask #86 from Vaybs, you can get it here


Pieces of the kit used in this tutorial are
PP6
PP9
Heart Frame
Bead Splatter
Canister
Chef Hat 2
Chococupcake
Cupcakewhite
Potholder
Licorice
Wooden Spoon
Wisk
Tired Cake
You must have working knowledge of PSP to complete this tutorial.  This tutorial was written using PSPXII

Open new Canvas 600*600

Open PP6 and resize to 600*600.  Paste apply mask and resize to your liking, Merge Group,
Open Heart Frame c/p to canvas, resize to your liking. 
Open PP9, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections, Modify, Expand, 3 pixels.  Select okay, invert selection and delete leaving the inside of the frame with your paper.

Take your tube and paste it on top of the frame.  Use the wand to select the outside of PP9, and erase the bottom of the tube so it looks like she’s inside the tube.  Apply Lokas 3D effect


Bead Splatter, rezsize to your liking and place over the top of the mask
Canister, resize and place over the bottom of the tag, were you erased the bottom of the tube,  Duplicate and Mirror.  Use The Comic font, color black, size 4 and put the words “Sugar”  on one canister plaque, and “Spice” on the other
Chef Hat 2 resize and place to your liking
Chococupcake, resize and place to your liking
Cupcakewhite, resize and place to your liking
Potholder, resize and place to your liking
Licorice, resize,duplicate, and place to your liking
Wooden spoon, Resize and place to your liking
Whisk, Resize and place to your liking
Tired Cake, place under the frame, erase the bits that sticks out.  Duplicate, Mirror, set them on either side of the tube


Apply drop shadow to your taste.  Mine are all 2*2’s
Resize the signature if needed
The name.  Using Civitype size 36  Color #ea5797, drop shadow
Drop Shadow to your liking
Add your copyright information and license number before save



Monday, October 17, 2011



Any resemblance to any other tutorial or signature is merely coincidental and is not intended.

I am using the artwork of Anna Garrett Blair–.  You can purchase his artwork and a license to use them HERE you MUST have a license to her his work

I am using the font  AtlandsketchesBB and Crazy Milktop Girl
I am using plugins: Lokas 3d Shadow, Alien Eye Candy 3.1 Glow
I am using PTU Wicked Princess Scraps Labotomy, which you can purchase here
I am using Mask #Valentine 6 from Vix, you can get it here


Pieces of the kit used in this tutorial are
PP12
PP14
Frame3
Chained Heart
Splatter 1
Ball and Chain
Cuffs
Bloody Hand

You must have working knowledge of PSP to complete this tutorial.  This tutorial was written using PSPXII

Open new Canvas 600*600

Open PP12 and resize to 600*600.  Paste apply mask and resize to your liking, Merge Group,
Open Frame3 c/p to canvas, resize and rotate to your liking. 
Open PP14, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections, Modify, Expand, 3 pixels.  Select okay, invert selection and delete leaving the inside of the frame with your paper.

Take your tube and paste it under the frame, I Mirror, Hard light. 
Paste your full tube layer on top, resize and place to your liking, Apply Lokas 3-D plug in


Chained Heart, resize and place to your liking
Splatter 1 Resize and place to your liking
Ball and Chain resize and place to your liking
Cuffs, resize and place to your liking
Bloody Hand resize and place to your liking

Apply drop shadow to your taste.  Mine are all 2*2’s
Resize the signature if needed
Saying: AtlandsketchesBB 00000 Size 26.  Selections, from Vector object.  Selections, Modify, Expand 3 pixels.  New Raster layer, flood fill with fffff,
The name.  Using Crazy Milktop Girl size 16 color 00000.  Alien Eye Candy 3.1 Glow.  Fat, Pixels 3 color fffff
 Drop Shadow to your liking
Add your copyright information and license number before save


Tuesday, October 11, 2011


Any resemblance to any other tutorial or signature is merely coincidental and is not intended.

I am using the artwork of Anna Liwanag–.  You can purchase his artwork and a license to use them HERE you MUST have a license to her his work

I am using the font 

I am using plugins: DBS Flux, Alien Eye Candy 3.1, Alien Skin Xenofex 2.0 Lokas 3-D Shadow,
I am using PTU Wicked Princess Scraps Smokin, which you can purchase here
I am using Mask #366 from Weescotslass, you can get it here



Pieces of the kit used in this tutorial are
PP7
PP1
Paper 17
Laceframe
Beaded Swirl
Martini Glass
Gem
Champaign Bottle
Bow
Pianokeyswave

You must have working knowledge of PSP to complete this tutorial.  This tutorial was written using PSPXII

Open new Canvas 600*600


Open PP7 and resize to 600*600.  Paste apply mask and resize to your liking, Merge Group, DBS Flux, Bright Noise, Intensity 27, Mixed

Open Laceframe c/p to canvas, resize to your liking.  Alien Eye Candy 3.1, Glow pixels 2, Fat, Color #fffff
Open PP1, resize to 600*600. Paste under your frame, using your Magic Wand, select the inside of your frame, go to Selections, Modify, Expand, 3 pixels.  Select okay, invert selection and delete leaving the inside of the frame with your paper. Xenofex, Constellation


Take your tube and paste it under the frame, I used the close up, mirrored and set it to Luminacy Legacy
Paste your full tube layer on top, resize and place to your liking, Apply Lokas 3-D plug in


Beaded Swirl, resize and place to your liking, duplicate and repeat, apply same Xenofex Bright Noise settings
Martini Glass, Resize and place to your liking, use Xenofex on the pink in the glass
Gem, resize and place to your liking
Champaign Bottle, resize and place to your liking
Bottle 01, resize and place to your liking
Bow, resize and place to your liking
Pianowavekeys behind everything else, resize and place to your liking

Apply drop shadow to your taste.  Mine are all 2*2’s
Resize the signature if needed
The name.  Using Baroque Script size 36  Colors #1d1221,Eye Candy 3.1 Glow 2 pixel, fat setting color #fffff
Drop Shadow to your liking
Add your copyright information and license number before save

Search

Join me!

Drop Me A Line!

Followers

Stores I Sell In

I Design For

Who I CT For

"

CU Licences

Photobucket